Frequent question: How do you use a motorcycle chock?

How does a motorcycle chock work?

A motorcycle wheel chock is a safe anchor that’s placed against the wheel to prevent the bike from moving. You can use it when parking your bike or for stabilizing it during repairs. It can also be used to enhance your safety after lifting your motorcycle with a lift table.

How does a chock work?

Wheel chocks (or chocks) are wedges of sturdy material placed closely against a vehicle’s wheels to prevent accidental movement. Chocks are placed for safety in addition to setting the brakes. The bottom surface is sometimes coated in rubber to enhance grip with the ground.

Do you need a motorcycle wheel chock?

So, if you want to transport your motorcycle as safely as possible, it’s best to use a wheel chock to secure the wheels during your trip. If you don’t have the budget for a metal wheel chock, you can always make one from wood or any other sturdy material.

How many wheel chocks does OSHA require?

At least two chock blocks shall be provided. These blocks shall be placed to prevent rolling of the vehicle whenever it is parked during loading and unloading operations. Standard for Surface Operations – 30 CFR § 56.14207 Parking procedures for unattended equipment.

IT IS INTERESTING:  Question: Can you get prescription motorcycle goggles?

Is one wheel chock enough?

The standard notes that chocks should be placed under the rear wheels, which means two chocks should be used – chocking just one wheel isn’t enough. … It’s important to remember that wheel chocks aren’t a standalone solution to preventing trailer movement at the loading dock.

How do you tie down a motorcycle in an enclosed trailer without a wheel chock?

Use soft straps on the bike itself, then loop each of those to a ratchet strap. Compress your shocks a little, so the straps won’t disengage if you hit a bump in the road. Choose your anchor points carefully; two at the front, two at the back, one to a side. Don’t leave any slack in the straps.

How do you tie down a motorcycle on a Uhaul trailer?

We recommend you use the two tie-down points nearest to the wheel chock and two at the back of the trailer. Lower the trailer ramp and, with the help of a friend, push the motorcycle up and into the trailer until the front wheel rests against the wheel chock.

Where can I tie down my motorcycle?

Transporting A Motorcycle With Tie-Downs

Two ties at the front and two on either side are adequate for most streetbikes, but if you’re paranoid, six ratchet tie-downs—four in front and two at the back—will offer max security, even for a Boss Hoss.

How much do motorcycle trailers cost?

The cost of motorcycle trailers varies as much as their weight and loading capacity. A simple hitch rack mount for a SUV or RV can cost as little as $200-$400. A small flatbed trailer may cost less than $2,000, while a mid-range enclosed trailer is usually around $5,000.

IT IS INTERESTING:  Your question: Can you put bigger wheels on a motorcycle?

How much does it cost to rent a motorcycle trailer?

The uhaul M/C trailer is usually $15/day. But you can get the slightly larger $20/day trailer and they will allow 1 way rentals with that one.

Types of transport