How are motorcycle handle bars measured?

There are three basic measurements you are going to take to determine your handlebar dimensions: rise/height, pull back, and width. … This way your buddy can mark where the string and straight edge meet and then measure the distance from the mark on the string up to the center of the broomstick to determine the height.

How are handle bars measured?

The easiest way to measure those handle bars is with a set of digital or vernier scale callipers. If you don’t have callipers then you can use a simple measure tape. Just wrap around the bar at the point you want to attach the Oi to get the circumference size and then divide by pi (….

Are all motorcycle handlebars the same diameter?

Diameters vary; commonly 7⁄8, 1, and 1 1⁄4 in (22, 25, and 32 mm), though oversized bars of 1 1⁄4, 1 1⁄2, and 1 3⁄4 in (32, 38, and 44 mm) may reduce to 1 in (25 mm) at the grips so standard controls may be mounted.

IT IS INTERESTING:  Best answer: How long does a Ducati dry clutch last?

What size are stock Harley handlebars?

Harley Davidson Model Harley Davidson Description Clamp Area
XL883N Sportster Iron 883 2-1/2″ x 5-1/2″
XL1200C Sportster 1200 Custom (Risers 6″) 2-1/2″ x 4-1/2″
XL1200C Sportster 1200 Custom (Risers+Speedo 6″) 2-1/2″ x 5-1/2″
XL1200R Sportster 1200 Roadster 2-1/2″ x 4-1/2″

No person shall operate on a public highway a motorcycle in which the handlebars or grips are more than thirty inches higher than the seat or saddle for the operator.

What height ape hangers should I get?

In general, your hands will be most comfortable at some height below your shoulders, with hands spread slightly wider than shoulder width. Run a tape measure down from one hand to the height of the risers on your bike to get an approximate height that you find comfortable.

What width drop bars do I need?

Bars level with or lower than your saddle: Go with the width of your acromion processes. So if you are 140 lbs, not muscle bound and not heavy set, and your width measures to 42cm, get a 42cm bar. If you are beefier, get a 44. When you are stuck between sizes of bars, size up to the nearest bar width.

What width handlebars should I use?

The standard fitting advice is to get a handlebar as wide as the measurement between your AC joints. Those are the bumps atop your shoulders where the collarbone attaches just inboard of your deltoid muscle. But many riders prefer a handlebar slightly wider than their shoulders.

How wide should my drop bars be?

A reach of less than 80mm is short; 80-85mm is medium; 85mm or more is considered long. Width: Most companies measure a bar’s width between the center of each drop. Common sizes are 38, 40, 42, and 44cm.

IT IS INTERESTING:  Does Harley Davidson make an automatic transmission motorcycle?

Why do bikers have high handlebars?

High handlebars so Biker’s hands are at or above their shoulder height.. Refers to a handlebar style where the handgrips are located at a higher position, so as to enable the rider’s arms to “hang” Picture “Clyde” from “Every Which Way but Loose” and you’ll get a perfect understanding of the riding position.

Is it hard to change handlebars on a motorcycle?

Changing bars is easy, ridiculously easy….as long as all your cables are long enough. Going to a lower rise is pretty much a guarantee that it will work. Changing to a higher rise will usually work if it’s less than 2” over stock.

What is the standard handlebar grip diameter?

Standard handlebar grip area diameters. There are only two current standard sizes: Flat bars have a 22.2 mm (7/8″) grip area diameter. Road (“drop”) bars have a 23.8 mm (15/16″) grip area diameter.

Why are ape hangers illegal?

High-set ape hanger bars were banned in 30 American states in the 1960s. The American was on the pretext of safety, but was more likely introduced so police had reason to pull over and search riders believed to be members of outlaw motorcycle gangs. … Laconia Motorcycle Week Association spokesman Charlie St.

What’s the point of ape hangers?

Because ape hangers allow a rider to exert far more force on the handlebars, it’s more or less mandatory to use a firmer riser bushing than factory rubber.

What does pull back on handlebars mean?

The pullback provides an indication of the angle that the handlebars deviate from a 90-degree height. They may move toward or away from you.

IT IS INTERESTING:  What is the maximum speed limit for motorcycles?
Types of transport