You should check and adjust your chain every 500 miles (805 km), and more often for a dirt bike. It’s also a great time to look for kinks or rust, and to give your chain a quick cleaning and lubrication, too. Step 1 Read the owner’s manual for the correct amount of drive-chain slack.
How many miles should a motorcycle chain last?
Replacing your chain regularly can prolong the life of your drivetrain. Most mechanics agree that you should replace your chain about every 2,000 to 3,000 miles, depending on your riding style.
How much does it cost to adjust a motorcycle chain?
The local dealer charges $25 for a chain adjustment (that includes a cleaning and lube).
How do you know when to change your motorcycle chain?
A common rule is to replace both front and rear sprockets every time you replace your chain. This is a good rule to follow if your chain has lasted for it’s full life of, say, 15,000 miles. But, sometimes a sprocket replacement can wait in cases where you’re replacing a prematurely worn chain.
Why does my motorcycle chain keep getting loose?
A motorcycle chain that keeps getting loose is usually caused by the rear axle or chain tensioning bolts not being tight enough. It can also be cause by a new chain not being worn in enough, worn down sprocket teeth, having too tight of a tension, or having the wrong size of chain installed.
What happens if motorcycle chain breaks?
If a motorcycle chain breaks while riding, you will immediately lose the driving force the engine applies to the rear wheel and your motorcycle will lose power.
How do you know if your sprocket is worn out?
Look closely at the sprocket teeth to see if they have become sharp at the tips and/or slightly curled. The teeth on a new sprocket are straight and have a flat or domed shape at the tip. If the teeth are sharp, the sprocket is worn.
Can you use WD40 on motorcycle chain?
If the chain is wet using a water displacing lubricant like WD40 is better than proper chain lube. It will chase the moisture out instead of sealing it in. In dirty conditions you do not really want sticky lube on the chain rollers where it contacts the sprockets. … Lube the chain before you wash the bike not after.
How tight should your motorcycle chain be?
On average, however, most street motorcycles will need a chain tension of about 20 – 30 mm, or about a half inch to an inch in slack. This means that the chain should be able to move about a half inch to an inch up and about a half inch to an inch down. It’s easiest to measure this using a measuring tape.
How do I know if my chain is worn out?
Another ballpark method for checking chain wear is by measuring it with a ruler. Pick a rivet and line it up at the zero mark. Count 24 more rivets and your last rivet should be at the 12″ mark of your ruler. If it is off by more than 1/16″ your chain is stretched to the point of replacement.
Do new motorcycle chains stretch?
Chain simply does not stretch that much, if at all. You’ll replace your tires more often than you have to adjust for chain “stretch”. Plus, setting your chain tension too tight is a BIG no-no. Better too loose than too tight.
Did sprocket and chain?
The D.I.D. Street X-Ring Chain & Sprocket Kit is a high quality replacement that offers longevity for higher CC sport bikes and sport touring bikes. … X-Ring Chain & Sprocket Kits feature low friction x-ring chains, D.I.D. chromoly steel front sprocket and heat treated high carbon steel rear sprocket.
Is it dangerous to ride motorcycle with loose chain?
The point here is the that a tight chain or a loose chain, both would cause serious trouble to the motorcycle. … Precise Chain Tension: The chain of your motorcycle needs to be in a precise tension so that it doesn’t knock off while riding or creates wear and tear to the Sprockets.
Is my chain too loose?
Check your chain out. It should be tight enough that it only allows you to move it up and down about one inch. If it is sagging or much looser than that, you need to tighten that chain up. Chains often loosen when a bike does not have a derailleur.