You should check and adjust your chain every 500 miles (805 km), and more often for a dirt bike. It’s also a great time to look for kinks or rust, and to give your chain a quick cleaning and lubrication, too.
How many miles should a motorcycle chain last?
Replacing your chain regularly can prolong the life of your drivetrain. Most mechanics agree that you should replace your chain about every 2,000 to 3,000 miles, depending on your riding style.
How do you know when to change your motorcycle chain?
A common rule is to replace both front and rear sprockets every time you replace your chain. This is a good rule to follow if your chain has lasted for it’s full life of, say, 15,000 miles. But, sometimes a sprocket replacement can wait in cases where you’re replacing a prematurely worn chain.
How much does it cost to adjust a motorcycle chain?
The local dealer charges $25 for a chain adjustment (that includes a cleaning and lube).
Why does my motorcycle chain keep getting loose?
A motorcycle chain that keeps getting loose is usually caused by the rear axle or chain tensioning bolts not being tight enough. It can also be cause by a new chain not being worn in enough, worn down sprocket teeth, having too tight of a tension, or having the wrong size of chain installed.
What’s a high mileage for a motorcycle?
For small sports bikes, 20,000 to 30,000 is on the high side. For larger bikes, 50,000 miles and up is considered high motorcycle mileage. But before you write off any models, consider that a properly maintained bike can last well past 100,000 miles!
How often should I clean my motorcycle?
As a general rule of thumb, it’s important to wash your motorcycle at least every two weeks. Obsessives will do it every week, or sometimes more frequently. Additionally, irregular dirt such as road salt and bug guts require immediate attention to prevent paint or metal damage.
Can I put WD40 on my motorcycle chain?
If the chain is wet using a water displacing lubricant like WD40 is better than proper chain lube. It will chase the moisture out instead of sealing it in. In dirty conditions you do not really want sticky lube on the chain rollers where it contacts the sprockets. … Lube the chain before you wash the bike not after.
What happens if a motorcycle chain breaks?
If a motorcycle chain breaks while riding, you will immediately lose the driving force the engine applies to the rear wheel and your motorcycle will lose power.
How do I know if my chain is worn out?
Another ballpark method for checking chain wear is by measuring it with a ruler. Pick a rivet and line it up at the zero mark. Count 24 more rivets and your last rivet should be at the 12″ mark of your ruler. If it is off by more than 1/16″ your chain is stretched to the point of replacement.
How tight should your motorcycle chain be?
On average, however, most street motorcycles will need a chain tension of about 20 – 30 mm, or about a half inch to an inch in slack. This means that the chain should be able to move about a half inch to an inch up and about a half inch to an inch down. It’s easiest to measure this using a measuring tape.
Can you adjust motorcycle chain without stand?
If you lube your chain regularly, you will probably not need to adjust it every time you return from a ride, but as a chain nears the end of its usable life, you will need to adjust the slack more and more frequently. Although a rear stand is not required to adjust your chain, it will make the process much easier.
Do motorcycle chains stretch?
During use a chain will stretch (i.e. the pins will wear causing extension of the chain). To measure how much a chain has stretched, put the motorcycle in gear and rotate the rear wheel to tension the top strand of the chain. … Misalignment of front and rear sprocket is a major cause of rapid wear.
Is it dangerous to ride motorcycle with loose chain?
The point here is the that a tight chain or a loose chain, both would cause serious trouble to the motorcycle. … Precise Chain Tension: The chain of your motorcycle needs to be in a precise tension so that it doesn’t knock off while riding or creates wear and tear to the Sprockets.
Will a loose chain cause loss of power?
A tight chain and a loose chain will both lead to problems. A tight chain will increase friction on the chain and sprockets, leading to greater power loss in the drive train and excessive wear.