11 Answers. The coating is generally a form of wax, which is an excellent chain lube, and less apt to attract dirt than most chain oils. All you really should do is wipe off (with a dry cloth) any excess. … You want to leave the lube on the inside of the chain, where it’s really needed.
Does a new motorcycle chain need lube?
There’s no need to over-lubricate the chain; a little goes a long way. Wipe off any excess lube with a lint-free cloth. Modern chain designs and quality-manufacturing have significantly enhanced performance and driveline longevity.
How do you lubricate a new bike chain?
To apply bike chain lube, deposit a drop on the top of each link as you slowly backpedal for a few revolutions, so the lube has a chance to work its way in. Wipe off excess lube—if you don’t, it can attract more dirt to your chain. Use a light, waterproof lube such as Boeshield T-9 Waterproof Lubricant.
When should I lube my bike chain?
Lube your chain when the cracks and crevices are vacant of lube. Ride 5 miles a week in good weather and you’re good for months. Average 30 miles a week in good weather and you should be lubing about every 2 weeks.
Should I lube a new Shimano chain?
The factory lubricant all by itself is usually good for several hundred miles of service if the bike is not ridden in wet or dusty conditions. It is best not to apply any sort of lube to a new chain until it is clearly needed, because any wet lube you can apply will dilute the factory lube.
Can I put WD40 on my motorcycle chain?
If the chain is wet using a water displacing lubricant like WD40 is better than proper chain lube. It will chase the moisture out instead of sealing it in. In dirty conditions you do not really want sticky lube on the chain rollers where it contacts the sprockets. … Lube the chain before you wash the bike not after.
Can I use Vaseline on my bike chain?
Vaseline would be a terrible chain lubricant. As a petroleum jelly, it may share somewhat similar qualities to some chain lubricants, but the design and application are far apart. I would advise you to use lubricants and grease designed for cycling use. Another great product to use would be WD-40.
What can I use instead of chain lube?
Yes. You can use chainsaw (bar) oil as a wet bike chain lube and would be best used for riding in inclement weather where you need a sticky oil that will not get washed off from rain or wet conditions. Unless you’re consistently riding in rainy weather, this lube is too sticky for most riding conditions.
Is WD-40 Bike Lube good?
WD-40’s Dry Lube provided weeks of no-worries service on the road and about one week of trail riding before reapplication. It’s most effective when you give it a chance to dry after you wipe the excess off your chain. Naturally, there are limits to the formula’s durability.
Should I use wet or dry chain lube?
Dry lubes are for the driest conditions and cleanest chains. Wet lubes can be used all year, offer better value and have the greatest longevity. Whether wet or dry, it’s often a question of how much time and effort you want to put in. Either way, make sure you use a lubricant — your chain will thank you for it!
How often should I lube my mountain bike chain?
The first rule of thumb is that you should clean and oil your bike and chain yearly. Use a wet lube and wipe the chain down after every ride to help prolong the chain lubes life. Clean the chain and reapply lube every 100-200 miles.
How often should you tighten your motorcycle chain?
Too tight is as bad as too loose, but it’ll only take minutes to get it right. You should check and adjust your chain every 500 miles (805 km), and more often for a dirt bike. It’s also a great time to look for kinks or rust, and to give your chain a quick cleaning and lubrication, too.
Can I use engine oil to lubricate motorcycle chain?
Usage of engine oil or grease is not at all recommended over a proper chain lubricant. Grease wont penetrate into the O rings and X rings as compared to chain lubricant. … Motorcycle chain grease is far more sticky than engine oil, so it lasts longer.
Does Autozone carry motorcycle chain lube?
PRODUCT DESCRIPTION. Lucas Chain Lube is a low odor, semi-synthetic spray lubricant designed to meet the demands of today’s high performance motorcycle chains and sprokets.