The 5 part just describes the distance between the centers of the link pins (or wherever on the links, basically how long a link is) and the next two numbers describe the width of the chain. So a 520 chain is going to be narrower than a 525(and thus require a narrower front and rear sprocket) and lighter…
Can I use a 520 sprocket with 525 chain?
520 and 525 chain are identical apart from the width of the rollers so you will not have any problems with it.
What does 525 mean on a motorcycle chain?
A 525 chain (the size my bike uses) has a pitch of 5/8″ (15.88mm) and a roller width of 2.5/8″ (7.94mm). A 530 chain has a pitch of 5/8″ (15.88mm) and a roller width of 3.0/8″ (9.52mm).
What does a 520 chain conversion do?
* Performing a 520 conversion is a way to use a lighter chain on a bike equipped with a heavier stock chain. * The lighter chain reduces bike weight and allows for more efficient power generation by the motor.
What’s the difference between a 520 and 530 chain?
A 520 chain is a smaller pitch chain. Pitch being the distance between rollers. The 520 is a lighter weight chain than the 530. That is why people switch to the 520, but it may not last as long as a 530.
How wide is a 520 chain?
What do motorcycle chain numbers mean?
The numbers used in chain sizing are all in 5/8ths on an inch. The first number is the pitch (the spacing between the pin centres) and the other two are for the width of the chain. The first number is the pitch, the spacing between pins. 4xx = 4/8″ = 1/2″ pitch. 5xx = 5/8″ pitch.
Will a 428 sprocket fit a 420 chain?
You can probably use the 428 chain on the 420 sprockets. Not the other way around though. 428 sprockets are too thick for a 420 chain. Depending on the sprocket cut.
Will 40 chain fit 420 sprocket?
The pitch will be the same but a 420 motorcycle chain is narrower than an ANSI 40 or 41 chain, so no it won’t fit.
Will a 428 chain fit a 40 sprocket?
Nope! the heavier roller from a 428 chain means the teeth of a 428 sprocket are of a different shape, sure the 40 rollers fit and there’s no binding or such..
What motorcycle chain is best?
Let’s take a quick look at the best motorcycle chains:
- RK Racing Chain O-Ring 520-SO-120. …
- Pro Taper 520 MX Chain. …
- JT Sprockets JTC420HDR134SL Drive Chain. …
- Conibear 530 Gold Motorcycle O-Ring Chain. …
- Drag Specialties 530 O-Ring Chain. …
- Vortex V3 Chain and Sprocket Kit. …
- EK Chain 525 SRX2 Chain. …
- Renthal O-Ring 120-Links Chain.
How often should motorcycle chain be replaced?
But chains wear out over time and need replacing. So, how often should a motorcycle chain be replaced? In general, a properly maintained motorcycle can will last 20,000 to 30,000 miles, sometimes more. But, some last as little as 5,000 to 10,000 miles.
Will a 520 chain fit a 530 sprocket?
A 530 chain on a 520 sprocket will work just fine, a 532 will not. The differance between a 520 and 530 is the width, the roller diamiter and pitch are the same.
What is Z ring chain?
A ‘Z ring’ is an X-ring with an asymmetric profile, with different designs intended to prevent twisting or sliding, or to fit some specific purpose (e.g. seat inside a retention groove). … In practical terms, any ‘sealed’ chain can be considered equivalent.
What’s the difference between 525 and 530 chain?
the 530(or 38)chain is the largest…by way of width i assume; It is 1/8 inch larger than a 525 (5/16) and the 525 is 1/8 larger than the 520 (1/4).
What are chain dimensions?
Chain dimensions are reference dimensions driven by the geometry. You cannot change their values or use the values to drive the model. When you create chain dimensions, your first selection defines the starting edge of the chain. Subsequent selections are measured from one selection to the next.