An auto tuner is a unit that helps in adjusting air and fuel, for bikes that use the fuel injection technology. An auto tuner monitors the performance of a motorcycle and constantly tunes the air and fuel ratio to an ideal capacity, hence allowing excellent full delivery and optimum performance of your motorcycle.
What does tuning a motorcycle do?
During this tuning process, it monitors ignition, fuel, and air supply to get you the most possible horsepower and torque. … Horsepower is top speed and torque is what gets us there. Air-fuel ratio is how much air and fuel are mixing and entering the bikes combustion chamber.
How much does it cost to get a motorcycle tuned?
When u get your bike tuned on a dyno you are getting a custom map built specifically for your bike and this process can take well over an hour and the average price is about $250.
Do you need to tune your motorcycle after exhaust?
If you get a full system specifically designed and tuned to your bike however, it should bolt straight on without issue, if the manufacturer of the exhaust has done their job properly. … But it is advised, as the bike is designed to run with it’s stock setup.
What does a motorcycle tune-up include?
Motorcycle Tune-Up. … Even so, your bike will require a periodic tune-up to keep it in fit condition. Tires and wheels, chain and sprockets, brakes, air filter, battery, fluid levels, valves, fuel system, and major bolt torque specs need to be checked and set in top working condition.
How long does it take to dyno tune a motorcycle?
Fuel-injected motorcycles typically take four hours. Carbureted motorcycles typically take two hours, due to the fact that there are fewer adjustments that can be made on carburetor engines. Additional costs depend on the method that is used; the price of adding a Race Tuner, ThunderMax, etc.
Should I tune my Harley after exhaust?
The rule of thumb is generally that you will only need to tune if you change your exhaust OR your air cleaner. If you change both you’ll definitely need to get a tuner and/or pay someone with a dyne to tune your bike.
Do you need to tune a Harley with slip ons?
Do I need to tune my motorcycle after adding your pipes? Our Touring slip-ons do not require, nor do we recommend, tuning when used with the stock headers. Our Softail, Dyna, Sportster, and Indian Scout slip-ons do not require tuning, but it is recommended for maximum performance gains.
How much does Harley Tune cost?
Service Pricing Menu
|*Prices for parts and labor vary by year and model. Please see a service consultant for an estimate.|
|Horsepower and Torque||$119.00|
|Dyno Tune||from $399.95|
Can you tune a motorcycle?
For the most part, there are two common, distinct applications of “tune” in motorcycle engine technology. The first is where a stock machine is serviced or tuned up, and the second is where an engine is highly modified or race tuned. … It is very beneficial to begin by understanding the way a four stroke engine works.
Will removing the baffles hurt my motorcycle?
Removing the baffles will change how the engine runs. It will usually cause the engine to run leaner (less fuel), and a lean mixture burns much hotter that can cause damage. Removing the baffles will also mess up the power curve of the motor. Usually loosing power down low and gaining a slight amount up top.
Will running straight pipes hurt my motorcycle engine?
straight pipes arent that good for a bike, because when you let off the throttle, the sudden lack of hot gases being pushed out can cause cold air to be sucked in, which can damage your exhaust valves, and make for a VERY pricey repair.
Does slip on exhaust add horsepower?
Slip-on systems are the cheaper option and offer great value for the amount you spend. They basically just replace the stock muffler of the bike and are a popular upgrade for sportbikes. … On an average, the slip-on can increase your horsepower by 5% while reducing the weight of your bike by pounds.
How often should you tune up your motorcycle?
But for the purposes of this article, we’re going to focus on motorcycle tune-ups. Simply put, a motorcycle tune-up is an extensive maintenance/service session. It’s a thorough check done on a bike to see if any parts or fluids need cleaning or replacement, done about every 5,000km or so, or once every six months.
How long does a motorcycle tune up take?
While the timeline ultimately depends on how many bikes are ahead of you in the Service Department, tune-ups are usually completed in a matter of hours. You can expect a basic tune-up to take 30-60 minutes and a major tune-up could run closer to 60-120 minutes.
What is a full service on a motorcycle?
A full service involves changing the oils, checking engine mounts gearbox mount exhaust flanges and mounts checking steering head bearings wheel bearings drive belt tension and condition, checking the brakes pads, lines and disc condition, Lubricating the clutch cable and the accelerator cable, checking for play in the …