In general, bikes will happily accept forks that are up to 20mm larger than their designers intended. Feel free to go beyond that if you must, but be prepared for a bike that the manufacturer didn’t really intend to create. That doesn’t mean it will suck, but it’s just something to be aware of.
Can I put 140mm forks on a 120mm bike?
Going from 120 mm up to 140 mm should be perfectly fine. It will probably give you 1 degree of slack angle to your front end and raise your bb height by possibly 1/2″.
Can I put a 120mm fork on a 100mm bike?
I have a 120mm fork for that bike for all-around riding and more marathon-type stuff, but for the intense shorter stuff, I’d rather keep it at 100. For all around riding, should be fine, but you may notice it’s a bit harder to keep the front wheel down on the steep uphills.
Can I put 140mm forks on a 100mm bike?
There is no good reason to slap 140mm fork on a frame that is designed for 100. It will no ride better and it may break, like many other already noted.
Can you replace the steerer tube on a fork?
If you have cut your fork steerer too short, got a new frame or bought a second hand fork we can fit a new steerer tube rather than buy a new CSU or fork. …
How do you install a fork stem extender?
- Remove the cover of original bike handlebar,remove the handlebar stand.
- Install the bike fork stem extender, then adjust the position.
- Fix the adjustment screw. …
- Install the handlebars stand and fixed the screws on the stand.
- Finally, install the cover of the bike fork stem extender.
Are SunTour forks any good?
The higher-level Suntour forks and shocks are very good. Don’t judge them by the bottom budget forks. I’d actually put them up there with Fox and RS on quality.
How do you know if a fork will fit your bike?
The main thing you need to look for is the steerer size. Most Mtb headtube is 1.1/8″, a few are 1.5″ or the combo of the two, tapered steerer. So as long as the fork is 1.1/8″ you are good to go.
Is 120mm travel enough for Enduro?
120mm bikes generally seemed to be big XC bikes, fast and efficient with enough travel to keep you out of trouble on the downs. … Even the newest Enduro only has 15mm more travel. Newer bikes might be better and more developed, but they’re not really making a new genre of bike/riding.
Is 100mm travel enough for trail riding?
100mm hard tail 29er is enough for all that riding.
How do I know my fork size?
The length of the fork is usually measured parallel to the steerer tube from the bottom of the lower bearing race to the center of the front wheel axle. A 1996 survey of 13 700c road forks found a maximum length of 374.7 mm and a minimum of 363.5 mm.
How much travel should a trail bike have?
Normally trail bikes have up to 140mm of travel. They straddle the line between harder DH-orientated riding and cross-country style riding which means that they have more travel than a full-on XC bike, but less than more hardcore-specific rides.
Can you put downhill forks on a hardtail?
you can always do downhill on a hardtail you dont have to pull the speed you normally would on a dh bike. but like another member said on the singletrack you glide away. and about frames breaking you dont really change the head angle that much with a 6 inch fork. a talas would be sick.
What does 100mm travel mean?
I just wanted to add that mm stands for millimeter (as mentioned by Chain Brain) and the conversion is this: 1 inch equals 25.4 millimeters. This means that a 100mm travel fork will compress roughly 4 inches.
Is it worth upgrading MTB forks?
Winding Up. So basically, fork suspension shouldn’t be your first upgrade, mainly because of a high price. However, it’s an upgrade that will give you the most. You can change a mediocre hardtail bike into an amazing bike, while full suspension bikes will require you to change the shock as well.